Deburring

Vibra-Line 5.0 model 800M is a manual bowl without any accessories. The machine is coated with 22 mm. PU (Polyurethane) coating. The working bowl with its 60 L. capacity can take up to 15 L. pieces per load depending on the design of the individual parts.

Machine data B800M:

Motor power: 0,75 or 1,10 KWh
Capacity L.: 63 L.
Bowl diameter: 280 mm.
Wear layer in bowl: 22 mm. yellow PU
Connection: 3×380 V, 16 Amp. CEE plug Grey
Machine colour: Ral 7015/7035
Main dimensions Ø x H: 830 x 900 mm.
Weight: 110 kg

Vibra-Line 1500B and 3000B:

Semi automatic round vibrator machine with 150 L.  or 300 L. bowl and with a noise reduction lid.

The U-formed bowl has vertical straight sides and an automatic discharging exit. Where ever the product is in touch with the machine the machine is coated with a min. of 22 mm. yellow PU (Polyurethane) coating.

The Working bowl handle from 50 L. up to 100 L. of product per charge, depending on the shape of the individual parts.

The deburring itself is operated on the manual touch screen where also the time, speed and water/compound is individually set.

The noise reduction lid as well as the discharging flap is pneumatically controlled. The finished products are discharged by lowering the discharging flap into the bowl itself – thus the finished products will be discharge from the “Vibra-Line” machine. On the touch screen (through the frequency converter) also the discharging speed can be regulated.

Machine data Vibra-Line 5.0 – 1500B:

Engine effect:  2.2 kW. over the frequency converter
Capacity L.: 150 L.
Bowl diameter:  260 mm.
Screed in bowl:  22 mm. yellow or brown PU
Connection:   3×380 V, 16 Amp. CEE socket Gray
Machine color:  Ral 7015/7035
Main measurement Ø x H:   1,220 x 1,040 mm.
Weight : 320 kg.

Machine data  Vibra-line 5.0 – 3000B:

Engine effect:   3.7 kW. over the frequency converter
Capacity L.:   270 L.
Bowl diameter: 275 mm.
Screed in bowl: 22 mm. yellow or brown PU
Connection:  3×380 V, 16 Amp. CEE socket Gray
Machine color:  Ral 7015/7035
Main measurement Ø x H:  1,430 x 1,270 mm.
Weight: 650 kg.

On the Turbo-line 5.0 S -serie, the discharging of the process water isn’t necessary. The discharge box is then raised approx. 30 degrees return to a user-friendly working height. In this way, the discharge box is placed at an ergonomic working / operating height for the staff. When changing media in the S-version, an insert is usually used which is placed in the discharge box. The medium can then be easily and simply removed or replaced.

When the process starts, water and process water must be added to the bowl. Sanding dust and workpiece waste will, together with the process water pass through the gap and continuing back to the sump. A level sensor is mounted here, which controls the diaphragm/submersible pump. The water will subsequently normally be led to process treatment plants, where the sludge part will be retained. The water is recycled again. Alternatively, water incl. compound is discharged directly to sewer. Before the process bowl is tilted, it-must be emptied of process water. This is done by opening the ball valve under the bowl so that the process water runs down into the sump. When discharging, the process bowl tips 125 degrees. This causes both chips and the remaining process water to come out.

Control of the machine’s functions takes place on a 5” colour touch screen. Here, rotation speed and process time are controlled as the most important parameters. All functions that are connected can also be operated manually. It is also possible to choose different languages. The process around the Turbo-Line model is prepared with, Electric powered submersible pump for removal of consumed process water incl. sludge, connection of water supply and bottom drainage

Models:

Turbo-line 5.0 model 1000S LxWxH 1.100x740x1.200 mm,  2,2 kW,  500 kg
Turbo-line 5.0 model 1400S LxWxH 1.700×1.300×1.1400 mm, 4,0 kW,  700 kg

Trough or Linear Vibratory machines are usually used when the size of the workpieces exceeds the application possibilities of large round vibrators. The chamber-shaped design allows several large parts to be processed simultaneously without contact.
Sensitive workpieces are either fixed in special clamping devices or loosely processed in separate separation chambers. In this way, damage to the workpieces during processing is ruled out.

Vibra-Trug e.g. 5.0 – 1450B volume 145 L.
The machine is coated with a min.of 22 mm. yellow PU
(Polyurethane) coating.
The Working bowl can with its 145 L. content handle up to 30 kg.
of product per charge, depending on the shape of the individual parts

Bacismodel ”Vibra-Trug 5.0 – 1450B” is with manuel start/stop.

Control cabinet with frequency converter to operate the machine, where both the speed of the vibration motor as well as the required deburring time can be individually adjusted.